Flatness and Level Measurement PlantGear

All rights reserved by PlantGear LLC

Geometric Laser Alignment

FLATNESS & LEVEL

Text Box: Machine Bed Flatness & Level Bases & Foundations Pumps Compressors Engines Level your machine or a series or disconnected planes. Using the T310 precision sweep laser you have a reference plane of more than 50 meters in all directions which adjusts itself to level all the time. You can use several sensors at the same time if needed. Use the program ProLevel to define a template of the points. You can do this on the fly in 5 minutes or load it from a previous measurement. Reuse templates for other jobs if desired. It can also be edited on the fly if variations are necessary. Now simply select the point to be measured by touching it on the screen. Move the R310 to that point and press the measure button . The height of the reference laser will be recorded at each point. When all the points have been measured we can optimize the reference by choosing any 3 points or by using the best fit function. We can view the data or report it now in many ways. Here we see a surface net laid over all the points. This can help provide an overview of what is going on. This is very convenient for making reports.

Text Box: Watch the Video